1, five series:
(1) using ordinary
Cold Rolled Steel as the base material, thickness 0.5mm-1.5mm, the CNC punching equipment, molding, and then to double-sided high-voltage electrostatic powder coating surface treatment corrosion resistance.
(2) Galvanized steel as a base material, thickness 0.5mm-1.5mm, the CNC punching equipment, molding, and then to double-sided high-voltage electrostatic powder coating surface treatment corrosion resistance.
(3) The color coated steel plate as base material, thickness 0.5mm-1.5mm, the CNC punching equipment, molding. Does not require surface treatment.
(4) Galvanized steel plate used as the base material, thickness 0.5mm-1.5mm, the CNC punching equipment, molding. Does not require surface treatment.
(5) as the base material of stainless steel sheet, thickness 0.5mm-1.5mm, the CNC punching equipment, molding, does not require surface treatment.
Second, the three specifications:
one peak series:
forming width 250mm - 500mm between the peak height of 50mm - 100m, within 4 meters in length can be processed. Thickness 0.5mm-1.5mm, in the above range, according to customer's drawings for manufacture.
Twin Peaks series:
forming a width of 400mm - 600mm between the peak height of 50mm - 100m, within 10 meters in length can be processed. Thickness 0.5mm-1.0mm, in the above range, can be processed according to customer's drawing produced
three peaks Series:
forming width of 810mm, peak height 80mm. Within 10 meters length can be processed. Thickness 0.5mm-1.0mm, in this range, can be processed according to customer's drawings produced.
2.All technical parameters can be changed, according to user's need.
3.Process of line:
Decoiler-active feeding-coil strip leveing -roll forming -measure length-cut to length-output table
4.Components of line:
| No. | Name | Unit | Qty |
| 1 | Decoiler | set | 1 |
| 2 | Main machine for roll forming | set | 1 |
| 3 | Automatic control system | set | 1 |
| 4 | Hydraulic system | set | 1 |
| 5 | Automatic fly saw cutting | set | 1 |
| 6 | Output table(Products receiving tables) | set | 1 |
We can also design and manufacture as your requires.
Packaging & Shipping
Packaging :
1. Tighten to container with steel wire rope and welded machine with container by angel iron
2. Main forming machine and un-coiler is naked (If you need we can also packed with water-proof plastic)
3. PLC contral system and motor pump are packed with water proof paper
