high precision ridge tile forming machine with hydraulic shear
No | Item | Parameter | Note | |
1 |
Suitable Material
| Type | ridge tile forming machine with hydraulic shear |
|
| Customized Profile | |||
Thickness | 0.3-0.7mm | |||
Yield Strength | 235MPA | |||
2 | Product Specs | Cover width | Customized Profile |
|
Length | Any length |
| ||
3 | Power Specs | voltage | 380V/3PH/50HZ | Up to Practical Profile |
Main Motor | 3-11KW | |||
Hydraulic | 4KW | |||
4 | Machine Specs | Transmission | Chain and Sprocket | Gearbox and Cardan Acceptable |
Structure | Column Block Or Wall Plate |
| ||
Shafter | No.45 steel tempered |
| ||
Rollers | No.45 steel chrome coated | Cr12 or other acceptable | ||
Cutting Blade | Cr12 quenched |
| ||
Press Mould | Cr12 quenched |
| ||
Punch Mould | Cr12 quenched |
| ||
5 | Working Capacity | Forming Speed | 15-20m/min for standard solution | Higher Speed Solution Available |
Working Speed | Up to Length-set Cutting | |||
6 | Hydraulic Cantilever (Optional) | Type | Hydraulic |
|
Max. Capacity | 5 T/10T/15T | |||
Suitable coil OD | 1200mm | |||
Suitable coil ID | 508/610mm |
| ||
Max Coil width | 1250mm |
| ||
7 | Forming Stand | 8-48 | Up to Practical Profile | |
8 | Forming Shaft Diameter | 55-120mm | Up to Practical Profile | |
9 | Type of Cutting | Length-set cutting after roll formed,CR12 mould steel | Pre-cutting acceptable | |
10 | Control System | Mitsubishi PLC and Inverter |
| |
11 | Output Supporter | 2 Pcs Simple Supporter | Auto Stacker Optional |
product show:tile Roll forming machine
other majored machine:roll forming machine
Packaging and shipping: roll forming machine
1). Tighten to container with steel wire rope and welded machine with container by angel iron
2). Main forming machine and un-coiler is naked(If you need we can also packed with water-proof plastic)
3). PLC contral system and motor pump are packed in wooden box with water proof paper coverage
Advantage: roll forming machine1)- we can send our engineer to your site and do the training for your men. you just only bear the cost for our engineer's air ticket,visa,accormadation,food and transpotaion in your country
2)You can send your men to our factory. we will teach them how to operate the machine without training charges
3)Actually theres another cheap and easy way to choose. Every machine leave our factory with one book of operation manual. You can read through the manaul first ,and get familiar with the machine. Then we can get a video call,and teach you on-line how to operate the machine.
4)Apart from above training course,we also provide 1 year warranty for all the easily broken part of the machine for free and whole-life technical service support
Our company:Our company is a professional manufacturer and exporter of cold-forming equipment and its whole automatic production line in North China. At recent years, large of our products have been sold to Russia, India, Australia, Armenia, and more than 50 countries and religions.
Our products are mainly used for C-type and Z-type purlins for Steel Structure production, bearing mould plate for high buildings and structured color plate or heated board for the maintenance of its roof covering and wall face, positive and negative plates for dust removal in environmental protection and so on .
Our marketing and design staff will respectfully listen to your definite requirements and demands ,design and produce your satisfactory equipment.
How to contact us?
Send your inquiry details below for detail quotation ,click”send” now !
Product Categories : Roll forming machine > Roll forming machine