Payment Type: | L/C,T/T,D/P,Paypal,Money Gram,Western Union |
---|---|
Incoterm: | FOB,CFR,CIF |
Min. Order: | 1 Set/Sets |
Delivery Time: | 20 Days |
Model No.: GLW series
Reciprocating Feeder,K type reciprocating feeder is suitable for the mine, mine, coal preparation plant, station, coal workshop, port bulk terminals, such as bulk transportation, bulk can be through the bunker or homogeneous transfer directly to the adhesive tape machine or other screening equipment, storage devices, etc.Realize the uniform feeding of bulk materials such as ore, sand coal and grain.The equipment body is installed in the hopper, the transmission device is suspended, according to the size of the feeding amount: K2, K3, K4 and other models.
Reciprocating feeder/coal feeder is used to transfer the large size materials and granular materials from hopper to receiving device uniformly, periodically and continuously in the production flow and to feed materials into the crusher continuously and uniformly also to screen the materials in the sandstone production line.
Advantages
High carrying capacity and high transmission efficiency.we also can supply the air cannon ,pneumatic diaphragm pump ,sewage pump ,electrical machinery
The gap between the side lining board, the slant liner and the bottom plate is adjustable, which can control the seam size accurately and greatly reduce the leakage.
The driving device is symmetrical arrangement, and double push rod is adopted to make the whole machine love balance, the transmission is stable, and the torsion phenomenon of the bottom plate is eliminated.
The bottom plate has a vertical stiffening plate, and it is supported by a three-way long supporting roller, which guarantees the rigidity of the bottom plate and eliminates the defects of bending deformation in the work of the existing reciprocating feeder.
Plate by a small piece of steel plate together, not only change when the light is easy, and may, according to the actual wear and tear, targeted to replace worn lining plate, making rational utilization of materials, reduce the maintenance cost.
Reliable work and long life.same as the wear resistant steel plate,shotcrete machine,dry type shotcrete machine,wet type shotcrete machine
Light weight, small volume, convenient maintenance.
Simple structure, reliable operation and convenient installation.
The closed frame structure greatly improves the rigidity of the frame.
Equipped with finite moment hydraulic coupler, full load start, overload protection.
Working principle
Using the drag down tilt 5 ° crank connecting rod mechanism of backplane on roll straight line reciprocating movement, when the motor start, even by the elastic coupling, gear reducer, a crank hin institutions drag sloping floor in rolls on a straight line reciprocating movement, the coal evenly discharged to the transport machinery, or other screening equipment.In this way, the coal or other abrasion is small, the adhesive is not very loose granular, the powder material is discharged evenly from the feeding equipment to the receiving equipment.
STRUCTURE
The K type reciprocating feeder is made up of silo funnel, box, gate, bottom plate, supporting roller, driving device and so on.
|
we are porfessional to supply all kinds of feeders ,like belt feeder ,apron feeder ,reciprocate feeder,air cannon and other coal mine equipment .
Product Categories : Coal Feeder > Reciprocating Type Of Coal Feeder