|Payment Type:||L/C,T/T,Paypal,Western Union|
|Terms of Trade:||FOB,CFR,CIF,EXW|
|Min. Order:||1 Set/Sets|
|Delivery Time:||30 Days|
|Productivity:||10000 SETS/ YEAR|
|Place of Origin:||China|
|Supply Ability:||15000 SETS/ YEAR|
|Certificate:||CE,ISO 9001, ISO 14001, OHSAS 18001|
Model No.: FG-S13RL Series
The three-phase coils are arranged in a "pin" shape, forming a central gas passage between the coils, which is connected to the center. The "smoke chimney" generates strong air convection due to the temperature difference of 30-40 °C between the upper and lower iron yokes. The cold air flows from below to The central passage is supplemented, and heat is radiated from the inner inclined surface of the upper iron yoke, and the heat generated by the transformer is quickly taken away in the natural circulation. The FGI S13 series eaton transformers usa with top quality and great service has several high performance features including 75 kva transformer amperage, line loss deduction: the no-load current is reduced by more than 90%; Ultra-quiet: the noise is reduced by 10-15 decibels; No interference: the magnetic flux leakage is reduced by more than 50%; Raw materials saving: the cost of copper and iron is reduced by 20%-30%; Significant economic benefits: the cost of ten years of substation is down 17.2% from the distribution transformer specification sheet.
Product Model Description
Conditions of Use
Maximum temperature: +40℃
Minimum temperature: -25℃
Maximum daily average temperature: +30℃
Maximum annual average temperature: +20℃
Iron core: the material performance is not lower than 30ZH120 cold-rolled silicon steel sheet; the three-phase three-column three-dimensional symmetric structure has the most balanced three-phase magnetic circuit; each group (roll) chip is wound by a thin steel strip on a special core winding machine. The pressure is even and firm; the core frame is vacuum annealed to eliminate stress and improve electromagnetic performance; the surface of the core is coated with epoxy paint, moisture proof and solidified.
Winding: paper-coated copper flat wire made of low-oxygen copper or QQ-2 acetal enamelled round copper wire; low-voltage coil is double-layer or four-layer round copper or new spiral, or foil type. The high-voltage coil is a multi-layer cylinder; the coil oil passage is corrugated, the interlayer insulation is double-sided adhesive paper; the low-pressure and high-pressure surfaces are coated with epoxy semi-adhesive glass fiber belt to increase mechanical strength.
Body and lead: Insulating cardboard is used to make upper and lower iron yoke insulation; laminated wood is used to make balance pad insulation; laminated paper is used as lead support; all fasteners are effective locking locknuts.
Oil tank: Fully sealed corrugated oil tank with triangular structure, corrugated sheets are provided in three phases to ensure heat dissipation and compensate for the expansion and contraction volume of oil volume change with oil temperature change; oil level gauge with pressure relief valve on the cover surface is convenient refueling and observing the oil level, and releasing pressure safety protection against sudden fault overvoltage inside the oil filled water cooled transformer.
1. Energy saving: the no-load loss is reduced by 40%-50%, and the load loss is reduced by 7%-10%;
2. Reduce line loss: the no-load current is reduced by more than 90%;
3. Ultra-quiet: the noise is reduced by 10-15 decibels;
4. No interference: the magnetic flux leakage is reduced by more than 50%;
5. Saving raw materials: the cost of copper and iron is reduced by 20%-30%;
6. Significant economic benefits: The cost of ten years of substation is down 17.2% from the generation oil filled transformers.
S13RL Series Three-dimensional Triangular Coil Core Oil Type Transformer Implementation Standards:
1. IEC60076-1:1993 Distribution Transformers
2. GB1094.1-1996 Electricity Transformers
3. GB6451-2008 liquid filled power transformers technical parameters and requirements
4. JB/T10088-2004 6KV~500KV class transformer power sound level
S13-M-RL Series Three-dimensional Triangular Coil Core Oil Filled Distribution Transformers Commonly Used Models:
S13-M-RL-2500KVA, S13-M-RL-2000KVA, S13-M-RL-1600KVA, S13-M-RL-1250KVA, S13-M-RL-1000KVA, S13-M-RL-800KVA, S13- M-RL-630KVA, S13-M-RL-500KVA, S13-M-RL-400KVA, S13-M-RL-315KVA, S13-M-RL-250KVA, S13-M-RL-200KVA, S13-M- RL-160KVA, S13-M-RL-125KVA, S13-M-RL-100KVA, S13-M-RL-80KVA, S13-M-RL-50KVA
|Rated Capacity (kVA)||Voltage Combination||Winding Connection Grade||No-load Loss (W)||load Loss (W)||Short Circuit Impedance (%)||No-load Current (A)|
|High Voltage (kV)||Tapping Range of High Voltage(%)||Low Voltage (kV)|
|30||6 6.3 6.6 10 10.5 11||±5 ±2×2.5||0.4||Dyn11||80||630||4.0||1.8|
When the oil filled transformer is stored, the oil level of the fully sealed transformer should be kept 2~3cm below the cover, and the storage condition should be checked regularly. For the transformer to be transported by the oil conservator, the oil conservator must be installed to ensure a certain amount of oil pressure and oil, to meet the needs of its temperature change, and the seal of the three phase distribution transformers must be protected during storage.
In Service in diverse Industries, Electricity Boards, Nuclear / Thermal / Hydel Power Plants, Railway Traction, High-Rise Buildings, Hospitals, Subways, Underground Vaults, Tunnels, Schools, Steel Factories, Chemical Plants, etc. Where safety is of prime concern.
Quality Environmental Certification
OEM Service is available
After-sales responding within 24 hours
One to one pre-sales consulting services
We are factory with high-tech professional engineer teams
Technician could be assigned to go abroad to carry out site commissioning and technical training
FGI-Tech, a diversified electrical supplier and manufacturer, provides world class AC motor products - medium voltage drives and explosion-proof AC inverter, advanced power distribution systems and power quality solutions. FGI-Tech is committed to innovating energy technology to make broad contributions to the world in the fields of industry automation and energy power".
The FGI-Tech's medium voltage variable frequency drives, feature a unique technology that allows FGI-Tech to offer a simple, flexible and reliable drive solution. Building on many years of experience, FGI-Tech has demonstrated capability as innovator with an imaginative approach to the design and development of high performance electric power systems, enabling greater affordability, efficiency and reliability.
FGI-Tech's BPJV series mining explosion-proof and intrinsically safe AC inverter as one of the high-tech products which combine digital frequency speed regulation technology and related cooling technology. It is widely used in coal mine with coal dust, gas and other explosive dangerous environment, dragging speed governing operation of motor to achieve soft start and soft stop, stepless speed regulation and other functions when the motor is overloaded.
FGI-Tech's distribution transformers are manufactured using the highest quality materials, employing the most modern and reliable manufacturing practices. These Transformers are used for indoor or outdoor applications and can be provided with off-load and on-load tap changers.
FGI-Tech's power quality products consist of static var generators (STATCOM). SVG is the best solution in the reactive power control field at present and has unparalleled advantages. It makes energy more efficient by stepless power factor correction. It is widely used in the application of Renewable power generation, Electrical welding systems, Industrial production machines and so on.
At FGI-Tech we believe in building strong relationships, helping our customers through the complete product life cycle, from selection and electrical system design through to commissioning assistance and after sales service and support. FGI-Tech supports electricity infrastructure with proven technologies to ensure that energy can be supplied in a stable, reliable, and optimal manner.
With standard controls, critical parts, packaged assemblies, and electrical/electronic components are stocked and ready to ship from FGI-Tech.
FGI-Tech aims to pursue innovation in energy and environment technology and to continue creating high-value-added, environmentally friendly products and systems that allow energy to be used stably and with maximum efficiency.
We hope that you are always holding FGI-Tech to high standards.