Find Two Wave Highway Guardrail, Rolling Machine, Tile Press Making Machine on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.
highway guardrail Roll Forming Machine , highway Guardrail forming machine, two wave haighway guardrail
Uncoiler--- flatting --- punchine --- fast feeding --- opto-electrical cutting --- forming --- alignment device --- collection --- controller --- forming moulds
Unit performance:
1, Total power of equipment is 90kw
2, Maximum height of profiles formed: 85mm
3, Maximum thickness: 4.0mm
4, Maximum forming speed: 15m/min
5, The welding machine body structure must conform to the requirement, the welding must conform to the national welding standard.
6, The equipment after antirust processing, brush antirust paint first, the antirust paint must cover comprehensively, then brush the high quality finish paint. The movable part shows the different color for caution
Equipment parameter:
1, De-coiler
1) The un-coiler with bipyramid and tension power,
2) Loading 8T. Inner diameter of coil: φ508mm,
3) Maximum diameter of coil: φ2000mm,
4) Power of tension power: 2.2kw,
2, Flatting machine
1) The wall plate type seven roller flatter, two rollers clamp deliver, five rollers for leveling.
2) Power: 7.5kw,
1) Using type Yl32-315 4 pillar hydraulic pressure puching machine,
2) Hydraulic pressure power: 22kw.
3) Material of blade mould & plunger chip is alloy steel Cr12MoV.
4, Fast feeding
1) Initiative delivers.
2) The power disposition is the 2.2KW.
3)The reductor is ZQ250.
5, Opto-electrical Cutting device
6, Forming machine:
1) Forming racks: 12sets
2) Cast iron torri type
3) Width of machine: 550mm
4) Material of torri is HT200, tempering
5) Double axis transmission gear box 1set, under the axis transmission gear box 10set, bevel gear modulus M=9, material of gear box is only HT200.
6) Power of main machine: 55kw, transducer speed governor. ZQ650 ,reductor, speed ratio:48.57, Between the transmission gear box uses 1 inch double chain drive; Connects with the rotary drive shaft between rollers, rotary drive shaft model 140-275; Uses 1.5 inch double chain drives with the speed reducer;
7, Collection table
8, Control system
Production line uses PLC controller, opto-electrical device control cutting. But manual and automatic control whole production line for each part coordination.
9, Forming mould:
Material is GCr15. Whole quenching hardness is HRC58 º ~62 º.
Name | Material | Specification | Protective finish | Standard | Certificates | Features |
two wave highway guardrail | steel Q345 | wave width: 312mm
wave height: 81mm
thickness: 2.8mm
length:4318mm | hot dipped galvanization
zinc coating weight: 1220 g/m2 | AASHTO M180 |
ISO9001:1998
European Certificate | durable
high intensity
great corrosion resistant |
Our service
1.)we can send our engineer to your site and do the training for your men. you just only bear the cost for our engineer's air ticket,visa,accormadation,food and transpotaion in your country
2.)You can send your men to our factory. we will teach them how to operate the machine without training charges
3. )Actually theres another cheap and easy way to choose. Every machine leave our factory with one book of operation manual. You can read through the manaul first ,and get familiar with the machine. Then we can get a video call,and teach you on-line how to operate the machine.
4.)Apart from above training course,we also provide 1 year warranty for all the easily broken part of the machine for free and whole-life technical service support !
1. Q:Where is your factory located? How can I visit there?
A: Our factory is located in Botou City, Hebei Province, China. We are near Tianjin and Beijing airport. We can pick you up at the airport or Cangzhou west train station.
2. Q:How does your factory do regarding quality control?
A: Quality is priority. We always attach great importance to quality controlling from the very beginning to the end. Each part of the machine components are strictly processed by advanced machine tools and experienced staffs. Every machine element is checked and inspected by our QC. Each machine before delivery shall test run and be well checked.
3. Q: Do you have after sales support?
A: Yes, we are happy to give advice and we also have skilled technicians available, We need your machines running in order to keep your business running.
4. Q: Once we've bought a machine from you, are you able to supply us with material?
A: We can assist you in finding the appropriate materials to suit your machine
5. Q: Do you sell only standard machines?
A: No, most of our machines are built according to customers specifications, using top brand components
6. Q: Do you have a warranty on your machines?
A: we guarantee one year warranty. At the same time, we provide lifelong technical support.
7. Q: What kind of controls do you use on your machines?
A: Yaskawa, Omron, Delta, Schneider, Siemens, and Mitsubishi as your need.
8. Q: What is your delivery time?
A: Depending on the type of machine, duration of 15 days to 185 days from date of order.
Our main products as below:
1.Roof and wall panel forming machines
2.Corrugated tile roll forming machine
3.Double layer roll-forming machine
4.Joint hidden roll forming machine
5.Downspout and waterspout roll forming machine
6.Metal roll forming machine
7.Sandwich panel roll forming machine
8.Shearing bend slitting Uncoiler curving machine
9.Russia roll forming machinery
10.Especially for Asia type ,Russia type and Africa type
We can design and manufacture the special type machine according to the customers’ requirement and we could provide technical guiding, production, installation, debugging and maintenance service to all customers.
Product Categories : Highway guardrail roll forming machin
